Description
AK-X95 Full Rise Scissor Lift
*This model should be securely anchored to concrete before operation. Concrete thickness must be at least 5.9” (150 MM) with a 3000 PSI rating. Failure to install this lift on the proper concrete, could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation.
- 8000lbs(3500KG) lifting capacity
- CE Approved and Certified. It has adopted the 115% dynamic loading capacity standard and was 150% static loading capacity tested
- Flush mount design
- Starting-up system design
-
Penumatic safety release
- 24V safe control system
- Height limit switch
- Composite rubber lifting blocks included
- Comes with self-lubricated bushing and bearing
- Drive-up ramps lock design as platform extension for long vehicles
- Top-level hydraulic system and aluminum motor with the fan on top to avoid overheating caused by long time working
- The unit needs to be connected to a compressed air source.
Max.lifting capacity
|
8000 lbs
|
Lifting height
|
72.3 inch
|
Lifting time
|
≤50S
|
Platform length
|
58.9 inch
|
Platform width
|
24.4 inch
|
Motor power
|
2.2kw
|
Rated oil pressure
|
20MPa
|
Air pressure
|
6-8kgf/c ㎡
|
SHIPPING POLICY: Please read carefully
*Please refuse the shipment and do not accept it if the package is visibly damaged, and take pictures as evidence.
- Freight shipping ONLY within the lower 48 states.
- Free shipping to commercial addresses only. Remote areas may be charged extra for shipping. Please confirm before delivery.
- Shipping carrier may charge extra to residential Delivery.
- THE BUYER IS RESPONSIBLE FOR UNLOADING FROM THE TRUCK.
- Customer should consider Forklift and unloading dock service.
- The buyer should be also responsible for any re-delivery charges.
- Buyers should inspect delivered the products carefully before signing Bill of Lading or Delivery Receipt at the time of delivery. Buyer satisfaction is assumed if no damages are noted on the delivery receipt.