447-902-3857 info@autokato.com

Facebook
Twitter
Youtube
LinkedIn
Pinterest

Autokato Engineering , Katool
  • Home
  • About us
  • Products
    • Auto Lifts
    • Tire Changers
    • Wheel Balancers
    • Combos
    • wheel Alignment machine
    • Diagnostic Tools
    • Shop Tools
  • News
    • car lift news
    • tire changer news
  • Download
  • TERMS
    • Terms of Use
    • Warranty
    • Refund Policy
    • Shipping Policy
    • Privacy Policy
  • CONTACT

car lift news

Home News car lift news Two-Post Lift Maintenance...

Two-Post Lift Maintenance

>>> Click Here For Pricing And Selection At Ebay <<<

 

1. Operation requirements:

a. The lifting arm should be shrunk to the minimum length as far as possible, and the lifting rubber pad should be placed in the middle below the recommended lifting part of the vehicle, and the lifting rubber pad should be adjusted for uniform contact.

b. First, raise the lifting arm to the lifting rubber pad to fully contact the vehicle, and check whether the load is firm.

c. Slowly lift the vehicle from the ground to ensure that the load is balanced, and then lift it to the required working height.

d. Release the up button and lower the vehicle to the safe position for maintenance.

e. Before lowering the vehicle, lift the vehicle first, open the safety insurance, then press the lowering button to slowly lower the vehicle until the lifting arm is at the lowest level, remove the lifting arm and drive out of the vehicle.

2. Maintenance requirements (monthly):

Monthly:

1) Check and retighten the anchor screws.

2) Lubricate the chain / cable with spray lubricant.

3) Check all chains, connectors, bolts and pins to ensure they are reliable and firm.

4) Visually inspect all hydraulic oil pipelines for possible wear.

5) Check whether the sliding block inside the column is lubricated correctly. Timely replenish high-quality heavy lubricating grease.

All foundation screws should be fully tightened. If any screw fails to work for some reason, the hoist should not be used until the bolt is replaced.

Every six months:

1) Visually inspect all moving parts for possible wear.

2) Check the lubrication of all pulleys. If the pulley drags during lifting, add an appropriate amount of lubricating oil to the axle.

3) Check and adjust the tension of the balance cable to ensure the horizontal lifting of the hoist.

4) Check the verticality of the column.

The inner corners of each column shall be lubricated with heavy lubricating oil to minimize the friction of the slider and ensure the smooth and uniform lifting of the hoist.

Tags:Car lift|Auto lift|Two-Post lift|Mid Rise Scissors lift

Related News

How To Use A Car Lift ?

How To Use A Car Lift ?

Mid-Rise Scissor Lift----AK-X80

Mid-Rise Scissor Lift----AK-X80

Specification for the function and use of four-wheel aligner

Specification for the function and use of four-wheel aligner

Choosing the Best Car Lift for Your Home Garage

Choosing the Best Car Lift for Your Home Garage

Choose Right Car Lift for Your Garage

Choose Right Car Lift for Your Garage

Lift Working Problems

Lift Working Problems

Product Categories

  • Auto Lifts
  • Tire Changers
  • Wheel Balancers
  • Combos
  • wheel Alignment machine
  • Diagnostic Tools
  • Shop Tools

Links

Google.comkatoolusa.com

内页左侧广告1

测试图2

LatestPost

  • Buying a two Post Lift You Need to Know
    2024-01-15
  • Car Lift Maintenance:How often?
    2023-11-14
  • Scissor Lift Maintenance Requirements & Tips
    Scissor Lift Maintenance Requirements &
    2023-10-30

Feedback

Contact Us

https://www.youtube.com/channel/UCAHiCOc_gSexr5EoHClEUyw

https://www.youtube.com/channel/UCAHiCOc_gSexr5EoHClEUyw

447-902-3857

info@autokato.com

https://www.youtube.com/channel/UCAHiCOc_gSexr5EoHClEUyw

2465 FM 359 South Rd, Building ,Brookshire,TX 77423

MOBILE WEBSITE

Copyright © 2020 Autokato Engineering LTD All Rights Reserved.

TERM │ Terms of Use │ Warranty │ Orders Shipping │ Privacy Policy
  • Skype.
  • E-mail
  • Whatsapp
  • Inquiry