Wheel Alignment Introduction
Four-wheel aligner is used to test alignment parameters of vehicle wheels, components of suspension system and components of steering system.
Using the lifting machine steps
Necessary equipment for maintenance, but novice car maintenance may not be available. Here, we will introduce you to the operating procedures of the lift.
Tire balancer safety operation procedures
1. Before tire changing machine operation, check whether there is any abnormality in the mechanical performance without load. It is strictly prohibited to operate with defects.
Katool AK-X80 Description
The surface mounted lift has been designed for the lifting of motor-vehicles for maintenance. The maximum lifting weight is as specified on the serial plate.
How to use the lift procedure
Step 1:Parking Step 2: Adjust the position of the lift arm, and align the cushion block on the arm with the lifting point of the car (the position where the car can be lifted)
Two Post Lift maintenance
1. Two post lift for home garage, gantry lift, scissor lift, main wearing parts, are used for 3 months for the first time, and the hydraulic oil should be replaced once, and then once every 6 months.
Tire Changer and Balancer Combo
1.Cost-effective: Tire changer and wheel balancer combo packages can save you a lot of money on your budget. Invest in your own wheel changer instead of paying the high service costs of the auto repair store - pressure regulators, car wheel balancing, car lifts, etc.
How Often Should Wheel Alignments Be Done?
Being a car owner comes with a lot of responsibilities. You need to care for and maintain your car regularly to get the most out of it. If proper care is not taken, it could not only damage your vehicle but may also cause accidents.